1. Isetshenziselwa kuphela ukuhlanganisa i-lap joint kodwa ukubekwa uphawu ngokuhlanganyela kwephaneli ye-acrylic kanye nodonga lwamakhethini engilazi engakhiwe;
2. Ekubekweni uphawu ngokuhlanganyela kodonga lwamakhethini e-aluminium ahlukahlukene kanye ne-aluminium nokunye;
3. Ekubekweni uphawu ngokuhlanganyela kukakhonkolo, amathayela, izitsha zobumba, amapulasitiki nezinsimbi zamapuleti;
4. Nokunye ukubekwa uphawu kokwakhiwa.
1. Ingxenye eyodwa, yelashwe ngokungathathi hlangothi ngokunamathela okuhle kakhulu, isimo sezulu kanye nokunwebeka kokuvalwa kwesimo sezulu kuma-curtainwall nama-facade wokwakha;
2. Isimo sezulu esihle kakhulu nokumelana okuphezulu emisebeni ye-ultraviolet, ukushisa nomswakama, i-ozone kanye nokweqisa kwezinga lokushisa;
3. Ngokunamathela okuhle nokuhambisana nezinto eziningi zokwakha;
4. Hlala uvumelana nezimo phezu kwebanga lokushisa elingu -400C kuya ku-1500C.
1. Hlanza ngezincibilikisi ezifana ne-toluene noma i-acetone ukuze ugcine izindawo ezingaphansi komhlaba zihlanzekile futhi zomile;
2. Ukuze uthole ikhava ebukeka kangcono ngaphandle kwezindawo ezihlangene ngompompi bokufihla ubuso ngaphambi kokufaka isicelo;
3. Sika umlomo wombhobho ngosayizi oyifunayo bese ukhipha i-sealant ezindaweni ezihlangene;
4. Ithuluzi ngokushesha ngemva kokufaka uphawu bese ususa imasking tape ngaphambi kwesikhumba sealant.
1.Ayifanelekile ukunamathela kodonga lwamakhethini;
2.Ayifanelekile indawo yomoya, ngoba iyadingeka ukumunca umswakama emoyeni ukuze uphulukise i-sealant;
3.Ayifanele indawo ebandayo noma emanzi;
4.Ayifanelekile indawo ehlala imanzi te;
5.Ayikwazi ukusetshenziswa uma izinga lokushisa lingaphansi kuka-4°C noma lingaphezu kuka-50°C endaweni yezinto.
Impilo yeshelufu: 12izinyangaif qhubeka uvala, futhi ugcinwe ngaphansi kwama-270C epholile,dindawo ngemuva kosuku lokukhiqiza.
Ivolumu:300ml
Idatha elandelayo ingeyezithenjwa kuphela, ayihloselwe ukusetshenziswa ekulungiseleleni ukucaciswa.
I-OLV4900 I-Modulus Ephansi Yokunyakaza Okuphezulu Kwesimo Sezulu Se-Silicone Sealant | |||||
Ukusebenza | Okujwayelekile | Inani Elikaliwe | Indlela Yokuhlola | ||
Hlola ku-50±5% RH kanye nezinga lokushisa elingu-23±2℃: | |||||
Ukuminyana (g/cm3) | 1.3-1.4 | 1.35 | I-GB/T 13477.2-2002 | ||
Isikhathi Esingenasikhumba (imizuzu) 25℃,50%RH | ≤60 | 15 | I-GB/T 13477.2-2002 | ||
I-Extrusion (g/5s) | 8-25 | 10 | GB/T 13477.4-2002,0.4MPa,25℃,3mm | ||
Ukushelela (mm) mpo 50±2℃ | ≤3 | 0 | I-GB/T 13477.6-2002 | ||
Ukushelela (mm) okuvundlile 50±2℃ | ≤3 | 0 | I-GB/T 13477.6-2002 | ||
Isivinini Sokwelapha (mm/24h) | 3-5 | 3.5 | / | ||
Njengoba Kwelashwe -Ngemva kwezinsuku ezingama-21 ku-50±5% RH kanye nezinga lokushisa elingu-23±2℃: | |||||
Amandla Okunamathela Aqinile (Mpa) 23℃ | 》0.6 | 0.6 | I-GB/T 13477.10-2017 | ||
Indawo Eyehlulekile Yokunamathela %23℃ | ≤5 | 0 | |||
Ukwelulwa Kokuphuka (%) | 》400 | 600 | I-GB/T 13477.10-2017 | ||
Ukuqina (Shore A) | 20-40 | 22 | T/FSI 015-2019 4.3.4 | ||
Ukulahlekelwa Okuningi (%) | ≤8 | 2.93 | I-GB/T 13477.19-2017 | ||
Isilinganiso Sokutholwa Kwe-Elastic (%) | 》70 | 87 | I-GB/T 13477.17-2017 | ||
Amandla Enyembezi (KN/m) | 》4 | 4.2 | I-GB/T 529-2017 | ||
Amandla Aqinile Ngaphansi Kwezimo Ezijwayelekile (Mpa) | / | 0.6 | I-GB/T 13477 | ||
Amandla okunyakaza (%) | / | +100, -50 | |||
Isitoreji | Izinyanga eziyi-12 |